HP ep9010 Series User Manual page 70

Reference
Projector specifications (Continued)
Video compatibility
IR receiver
Lamp
Optics
Light engine
Audio
Noise level
Vertical tilt
Vertical keystone
correction
Power
Environment
70
NTSC 3.58 MHz and 4.43 MHz
PAL B, D, G, H, I, M, N
SECAM B, D, G, K, K1, L
HDTV (480i/p, 575i/p, 720p, 1080i)
DVI with HDCP
PC video up to SXGA (by DVI-I connector)
Front and back of projector
210-watt lamp
4000-hour average lamp life (to half of original brightness)
Replacement lamp: L1731A
1.7 to 2.0 throw ratio (distance/width)
1 to 10 m (3 to 33 ft) focus range
128% offset (relative to half-height)
1.16:1 optical zoom
0.55-in. 12° DDR DMD
60-watt total peak power
15-watt per channel peak stereo speakers (two speakers
per channel facing front and rear)
30-watt peak subwoofer
less than 34 dBA
±10°
±20%
100 to 240 V at 50 to 60 Hz
Operating:
Temperature: 5 to 35 °C (41 to 95 °F)
Humidity: 80% RH max, non-condensing
Altitude: up to 3,000 m (10,000 ft), up to 25 °C (77 °F)
Storage:
Temperature: –20 to 60 °C (–4 to 140 °F)
Humidity: 80% RH max, non-condensing
Altitude: up to 12,000 m (40,000 ft)
User's Guide