Adjusting The Projector; Adjusting The Picture And Sound; To Adjust The Shape Of The Picture - HP mp3130 User Manual

This chapter describes how to make adjustments to the projector.
■
"Adjusting the Picture and Sound" on page 35
■
"Using the On-Screen Menu" on page 38

Adjusting the Picture and Sound

This section provides the following instructions on adjusting the picture and sound.
■
"To adjust the shape of the picture" on page 35
■
"To adjust the image according to the type of picture" on page 36
■
"To adjust other image settings" on page 37
■
"To adjust the audio" on page 37
■
"To adjust the projector setup" on page 37

To adjust the shape of the picture

If the picture has slanted edges on the screen, you can straighten them. This is done by
making long edges shorter until the picture is straight.
1. Open the on-screen menu and select Adjust picture > Keystone correction.
2. Adjust the keystone settings as needed using the menu buttons on the projector or
remote control:
❏
If the top of the picture is too wide or too narrow, press the up
automatic "vertical keystone" correction provided by the projector.
❏
If one side of the picture is too tall or too short, press the left
User's Guide
button until the width is corrected. This adjustment overrides the
button until the height is corrected.

Adjusting the Projector

3
or the down
or the right
35