Teldat VisorALARM PLUS 2U Operating Instructions Manual page 15

If the „ key is pressed, extended info is shown in the display:
where the date is shown in MM/DD/YY format.
The previous view can be selected by pressing the ƒ key.
In order to acknowledge a signal the user must press the ACK key again.
If there are more pending signals the receiver shows the following:
And the user must press the ACK again in order to visualize the highest priority signal.
When there are no more pending signals the receiver returns to its idle state displaying a status line
indicating that it is waiting for new signals.
5xx Dis/Byp
6xx
Others
« 11/17/06 16:33:23
00001234 E110 01 001
PRIMARY VisorALARM
xx Signals pending
PRIMARY VisorALARM
Waiting for signals
VisorALARM PLUS 2U Operating
III - 8
Test
Other
Doc.DM375-I
Ver.1.0