Accessing The Receiver - Teldat VisorALARM PLUS 2U Operating Instructions Manual

1. Accessing the receiver

Access to receiver keypad functions is password protected.
If you are not logged into the VisorALARM PLUS 2U receiver, both when the ACK key is pressed
twice or when the OK key is pressed to gain access to the receiver menus, a password is needed. The
LCD shows a prompt as in the figure:
The numeric keys must be used to introduce a valid numeric password for the system. There are three
privilege levels with different passwords to access the receiver. The default receiver passwords for the
three privilege levels are:
All the users ("Manager", "Supervisor" and "Operator") can monitor the receiver and acknowledge
signal one by one.
User "Manager" and "Supervisor" have the additional permission to acknowledge all the signals
simultaneously.
USER MODE
Password: *****_
User/Privilege
Manager
Supervisor
Operator
VisorALARM PLUS 2U Operating
III - 6
Factory Password
24680
13579
11111
Doc.DM375-I
Ver.1.0