Step 2: Connecting The Audio Cords - Sony dvp-cx875p Operating Instructions Manual

Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections, m through e,
p
I
- 7
?urround effects: TVS DYNAMIC (page 731,
TVS WIDE (page 73)
e (page
25)
Stereo amplifier (receiver) and two speakers
l
Surround effects: TVS STANDARD (page 73)
or
MD deck/DAT
deck
l
Surround effects: none
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
l
Surround effects: Dolby Surround (Pro Logic)
(page 94)
AV amplifier (receiver) with a digital input
jack
having a Dolby Digital or DTS** decoder and 6
speakers
l
Surround effects: Dolby Digital (5. I ch) (page 94).
DTS (5. I ch) (page 95)
e (page 26)
1 ._
m (page 27)
a (page 28)
%xamplk
I.,: ;;),f ( ... ':
:.< ,,,$,C(,',. ..:: :::...::w
,..,,
,'. :I// I 7 ::
:
Zxample
.:
5xample
Zxample
:!: Manufactured under license from Dolby
Laboratories. "Dolby," "Pro Logic." and the
double-D symbol xe trademarks of Dolby
Laboratories.
'+:'"DTS" and "DTS Digital Out" are trademarks of
Digital Theater Systems, Inc.
24