Sony dvp-cx875p Operating Instructions Manual page 21

@ If you are connecting to a video input jack
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will
enjoy standard quality images.
Yellow (Video)
White (L)
Red (R)
Yellow (Video)
White (L)
Red (R)
Use the red and white plugs to connect to the audio input jacks (page 25). (Do this if you are
connecting
to
a TV only.)
0 If you are connecting to an S VIDEO input jack
Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
@ tf you are connecting to a monitor, projector, or AV amplifier
(receiver) having component video input jacks
(Y/PB/PR)
Connect the component via the COMPONENT VIDEO OUTPUT jacks using a component
video cord (not supplied) or three video cords (not supplied) of the same kind and length. You
will enjoy accurate color reproduction and high quality images. If your TV accepts progressive
(480~) format signals, you must use this connection and set "COMPONENT OUT" to
"PROGRESSIVE" in "SCREEN SETUP" (page 91).
Green
Blue
Red
Green
Blue
Red
If your TV or video component has an S-LINK (CONTROL S) connector
You can control the player by pointing the remote at the remote sensor on the TV or video component. This
feature is convenient when you placed the player and the TV or video component away from each other.
Connect the TV or video component via the S-LINK/CONTROLS jack using the S-link (control S) cord (not
supplied). Refer to the instructions supplied with the component to be connected.
22