Step3:Tvhookups - Sony dvp-cx875p Operating Instructions Manual

Step 3: TV Hookups
Connect the supplied audio/video cord and the power cord in the order (m-131) shown below.
Be sure to connect the power cord last.
CDlDVD Player
to VIDEO
OUTPUT
1 or2
to AUDIO OUTPUT
L/R 1 or2
TV
to audio input
A : Signal flow
/2( Power source
To change the aspect ratio for the
connect&l TV
$' Hint
When connecting to ;I nwnuural TV. use a stereo-
mom cmversion cord (not supplied ). Connect the
VIDEO OUTPUT jack on the pIaye]- to the TV's
video input jack, and wmlect the AUDIO OUTPUT
L/R i/2 jacks to the TV's audio input jack.
Depending on the disc
and the
TV type
(standard 43 screen TV or wide
screen
TV),
the
image may not fit the TV screen.
If this happens,
change
the aspect
ratio (page
90).
When connecting to a TV that accepts
progressive (480~) format signal
You need to
use the
COMPONENT VIDEO
OUTPUT jacks to view progressive signals.
Hook up your TV using pattern @ on page
21, and
then
run Quick Setup on page 29.
18