Sony dvp-cx875p Operating Instructions Manual page 29

14
Press +/+ to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
Choose the item that matches the audio
connection you selected on pages 26 to
28 (e through m).
dam
l
OFF (page 95)
4s
l
ON (only if the amplifier (receiver) has
a DTS decoder) (page 95)
15
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 26 to
28 (m through m). Each of these is the
default setting and does not need to be
adjusted when you first connect the player.
Refer to page 88 for using the Setup Display.
Audio Connection (pages 25 to 28)
m
l
No additional settings are needed.
GQm
. Set "DOWNMIX" to "DOLBY
SURROUND" (page 94).
l
If the sound distorts even when the
volume
is turned down, set "AUDIO ATT" to "ON"
(page 93).
QDma
l
Set "DOWNMIX" to '"DOLBY
SURROUND" (page 94).
* Set "DIGITAL OUT" to "ON" (page 94)
31