Warning; Welcome - Sony dvp-cx875p Operating Instructions Manual

WARNING
Welcome!
To prevent fire or shock
hazard, do not expose the
unit to rain or moisture.
To avoid electrical shock, do
not open the cabinet. Refer
servicing to qualified
personnel only.
CAUTiON
The use of optical instruments with
this product will incl-ease eye
hall-d. As the lac;er beam used in
this CD/DVD player is harmful to
eyes. do not attempt to distscmblc
the cahint'~.
Refer servicing to qualified
pcrsonncl only.
CAUTION
TO PREVENT ELECTRIC
SHOCK. MATCH WIDE BLADE
OF PLUG TO WIDE SLOT.
FULLY INSERT.
For
customers in
the
U.S.A.
Owner's Record
The model and serial numherx are
located at the rear' of the unit.
Record the serial number in the
hpacc provided below. Refer to
than whene\icr you call upon your
SOlly &LlltZl- IW~illdill~ this pl~WTlllCt
Model No. DVP-CXX7SP
Serial No.
CAUTION
You xc catllioncd that any change
or modit-ications not cxprcssly
approved in this ni;u1i131 could void
your authority to opevak thih
cquipl~~ellt.
Thank you for purchasing this
Sony CD/DVD Player. Before
operating this player. please read
this manual thoroughly and retain
it for future reference.
This equipment ha4 hccn tcacl
and found IO comply with the
limits I'or ;I Class B digital de\,icc.
pursuant IO Part IS 01' the FCC
Rules. Thcsc limit:, are dcsignccl IO
PI-c~viclc rcawnahlc pi-otcctiw
;~gainst harmlul rntcrfcrciicc iii :I
re\identiul inst;tllation. Thi\
cquipmcnt few~~atcs. tiscs;. and cm
ratlialc radio I'rccltiency encl-g}
2nd. if not iibt;illcd aid uwd in
accord;mcc with the inhti-uclions.
may c:mst' harn~fi~l inrcrlkrncc to
radio comlnuriications. Howc~cr.
there is no guarantee that
interference will not ociur iii ;L
particular installation. If thix
ccluipment dots cau\c hatml~ul
intcrfcrcncc Lo radio or tclcvision
rcccption. which can hc
determined hy turning tlic
ccluipment 01'1' and on. the IIWI is
cncollra~cd IO ll'> to ci~l-l'ccl the
illtcl-fc1-cnce by OllC 01. Illol-c 01' IIlL'
li~llowing nira~iir~'~:
- Rcoricnr or rrloc:~tr the
rccci\ ins untrnn;r.
- Incre~ise the separution
between the equipment and
receiver.
- Connect the eyuipmrnt into an
outlet on it circuit different
from that to which the receiver
is connected.
- Consult the dealer- OI- an
experienced radio/TV
technician for help.