Philips DVDR3590H Service Manual page 71

http://www.jdwxzlw.com/?fromuser=华盛维修
Firmware Upgrading & Diagnostic Software
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
家电维修资料网，免费下载各种维修资料
DS_ASP_RealTimeClockSetValues
1602
This nucleus is used to set the real time clock to the correct values.
- Decode the user input.
- Write RTC value to ASP.
Less than 1 second.
User must give time and date like this:
hh:mm:ss dd/mm/yy
Number Description
160200 Setting the real time clock succeeded
160201 The ASP initialisation failed.
160202 The IIC bus failed.
160203 Wrong user input.
DS:> 1602 03:20:01 22/06/03
160200:
Test OK @
DS_ASP_RealTimeClockGetValues
1603
This nucleus is used to retrieve the actual real time from the ASP
- Read RTC value from ASP.
- Decode the RTC value.
Less than 1 second.
None
Number Description
160300 Retrieving the real time succeeded
160301 The ASP initialisation failed.
160302 The IIC bus failed.
160303 The CRC checksum of the message is wrong.
160304 The Real Time Clock has been found invalid or was not found.
DS:> 1603
Time: 03:20:17
Date: 22/06/03 (dd/mm/yy)
160300:
Test OK @
DS_ASP_NTCGet
1606
This nucleus reads the value of the NTC-resistor connected to the ASP, which
tells the ambient temperature to the processor.
- Read the ADC input pin of the ASP that is connected to the NTC-resistor.
- Display this value.
Less than 1 second.
None
Number Description
160600 Getting the NTC-value succeeded
160601 The IIC bus failed
DS:> 1606
160600: Temperature(NTC) ADC input value = 0x94
Test OK @
3139 785 32804 5. EN 71