Philips DVDR3590H Service Manual page 51

http://www.jdwxzlw.com/?fromuser=华盛维修
Firmware Upgrading & Diagnostic Software
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
家电维修资料网，免费下载各种维修资料
DS_SYS_SlashVersionSet
1217
Set the slash version of the system
- Decode the user input for the slash version to set
- Issue the command to set the slash version to the analogue board
Less than 1 second.
The slash version
Number Description
121700 Setting the slash version succeeded
121701 Invalid slash version, no slash version is set.
121702 Setting the slash version on the Analogue Board fails.
121703 Invalid input.
121704 The returned error code from the analogue board is unknown:
121705 No DS error code known for analogue board error:
121706 There was no response from the analogue board.
121707 Retrieving the current version failed
121708 Unknown recorder layout type
121709 Validating the section where the version is stored failed
121710 Getting the configuration section from NVRAM failed
121711 Initialisation of IIC or reaching NVRAM failed
DS:> 1217 82
121700:
Test OK @
DS_SYS_SlashVersionGet
1218
Get the slash version of the system
- Issue the command to get the slash version to the analogue board
- Return the received information to the user
Less than 1 second.
None
Number Description
121800 Getting the slash version succeeded
121801 Getting the slash version failed
121802 The IIC write failed
121803 The IIC read failed
121804 There was no response from the analogue board.
121805 No DS error code known for analogue board error:
121806 Reading the slash version failed
121807 Initialisation of IIC or reaching NVRAM failed
121808 Reading an unexpected section version in NVRAM
DS:> 1218
121800: The slash version is: 82
Test OK @
DS_SYS_VirginModeOn
1220
Turn on the virgin mode functionality (e.g. the auto channel search upon start-
up)
- Issue the command to set the bit for the virgin mode to the analogue board
Less than 1 second.
None
Number Description
122000 Turning on the virgin mode succeeded
122001 Turning on VirginMode on the Analogue Board failed.
122002 The returned error code from the analogue board is unknown:
122003 No DS error code known for analogue board error:
122004 There was no response from the analogue board.
122005 Section validation or write failed in NVRAM
122006 Reading the CONFIG section from NVRAM failed
122007 Initialisation of IIC or reaching NVRAM failed
DS:> 1220
122000:
Test OK @
3139 785 32804 5. EN 51