Philips DVDR3570H Quick Start Manual

1 Connect
Before connecting
Select the most suitable connection (A or B or C)
based on the type of device you have and your home set
up.
You can also refer to the accompanying User Manual for
other possible connections.
A Connecting Recorder and TV B Connecting Recorder and TV
with antenna only with Cable TV or Satellite Receiver
Television ( rear)
Television
(rear)
Antenna
(option B)
EXT 1
TV-OUT ANTENNA-IN
CVBS OUT
Y B P
EXT 1 TO TV EXT 2 TO VCR/SAT L
TV-OUT ANTENNA-IN
R P
R
S-VIDEO OUT AUDIO COAXIAL
VIDEO OUT AUDIO OUT DIGITAL OUT
Philips Recorder (rear)
Satellite dish/
Cable TV wall outlet
A A
Unplug the existing antenna cable from your TV and Keep the existing scart connection between the
connect it to the ANTENNA IN socket on this Cable Box/Satellite Receiver and your TV.
recorder.
If your TV only has one Scart connector, then
B
Connect an RF antenna cable (supplied) from the replace the scart connection with antenna
TV-OUT socket on this recorder to the connections (see option B).
Antenna In socket on the TV.
B
Connect a scart cable (not supplied) from the
C
Connect a scart cable (supplied) from the EXT2-TO VCR/SAT scart socket on this
EXT1-TO TV scart socket on this recorder to the recorder to the SCART (TO VCR) socket on the
SCART socket on your TV. Cable Box/Satellite Receiver.
D C
Plug in the power cable from the recorder to an AC Connect a scart cable (supplied) from the
power outlet EXT1-TO TV scart socket on this recorder to the
SCART socket on your TV.
D Plug in the power cable from the recorder to an AC
power outlet
C Connecting Recorder, TV and
VCR
Philips Recorder (rear)
CVBS OUT Y P B
TO TV EXT 2 TO VCR/SAT L
R P
R
S-VIDEO OUT AUDIO COAXIAL
VIDEO OUT AUDIO OUT DIGITAL OUT
EXT 1
TV-OUT ANTENNA-IN
TO VCR
TO TV
Note:
Your new Philips Recorder replaces the VCR for your
recording needs. First, unplug all the connections from
your VCR.
A Follow A connection before you proceed to step 2
below.
B
Connect a scart cable (not supplied) from the
EXT2-TO VCR/SAT scart socket on this
recorder to the SCART socket on the VCR.
C
Plug in the power cable from the recorder to an AC
power outlet
2 Set up
A
Finding the viewing channel
A
Press STANDBY-ON on the recorder.
B
Turn on the TV.
You should see the installation menu.
Menu Language
English
Please select your language.
Defines the languages of all Dansk
on-screen menu displays.
Deutsch
Español
Français
Italiano
Nederlands
Norsk
C
In case you don't see the recorder's setting menu,
Television press the Channel Down button on the TVs remote
( rear)
control repeatedly (or AV, SELECT, ° button) until
you see the menu. This is the correct viewing
channel for the recorder.
Antenna
B
Start initial installation
Use the recorder's remote control and follow the on-
screen instructions to complete the installation.
Philips Recorder (rear)
A
Select the desired menu language, your country and
CVBS OUT Y B P
the TV shape.
TO TV EXT 2 TO VCR/SAT L
R P
R
S-VIDEO OUT AUDIO COAXIAL
VIDEO OUT AUDIO OUT DIGITAL OUT
Note Press OK or the Green button on the remote
control to go to the next screen.
B
Press OK to start automatic analogue channel
search.
VCR (rear)
Channel search
SCART
Start Auto search
SCART
C
Once complete, press the Green button to
continue.
D
Enter the correct time in the entry field, press OK
followed by the Green button to continue.
Proceed the same for date entry.
E
To continue with the GUIDE Plus+ installation,
press the Green button.
Otherwise, press the Red button to skip.
3 Enjoy
About the Time Shift Buffer
C Install the GUIDE Plus+ system
(TSB)
Once you turn on the recorder, the selected TV
programme will be stored in a temporary hard disk
storage called Time Shift Buffer 'TSB'. The 'TSB' can
store up to 6 hours of programmes temporarily.
Press INFO to display the Time Shift video bar.
Follow the on-screen instructions to select your
Start time of the
language, country and enter the postal code of your
programme
area.
Note If no or wrong postal code is entered, it will
cause no GUIDE Plus+ (EPG) service information.
Selected clips for
recording
D Load the TV listing data
A
Press TIMER (GUIDE Plus+) to exit GUIDE Plus+
Notes:
system.
- The contents in the time shift video bar will be
Leave the recorder in 'standby' mode and turn 'on'
cleared when you press STANDBY ON (2).
the set-top box overnight to collect the TV listing
- The blue LED on the recorder will be lit up when the
data, this may take up to 24 hours.
Time Shift Buffer is active or when you playback a
recording from the hard disk drive.
Note If you tune to your Host Channel before going
to 'standby' mode, this recorder will start downloading
the TV listings data immediately.
B
Check the { Editor } screen the next day to ensure Watch TV – Pause live TV
the source and programme numbers are matching for
all channels.
Your Philips Recorder allows you to control the TV
programme. You can PAUSE it as if you were in control
of the live broadcast.
A Turn on your recorder to the live TV mode and
press P +/- to select a TV programme.
B
Press PAUSE LIVE TV to suspend it.
C Press PAUSE LIVE TV again to continue.
D
To return to live broadcast, press LIVE TV.
LIVE TV
About the internal hard disk
drive
PAUSE LIVE TV
This recorder's hard disk drive can be used as a Media
Jukebox, allowing you to store and playback your TV
HOME
programmes, videos, music and photos fi les.
Press HOME on the remote control to access your
contents stored in the { Hard Disk }.
INFO
TIMER
GUIDE Plus+
Programmes
stored in the 'TSB'
Now
22:04:30
Present time
Current time
of playback