Philips DVDR3590H Service Manual page 38

http://www.jdwxzlw.com/?fromuser=华盛维修
EN 38 5. 3139 785 32804
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
家电维修资料网，免费下载各种维修资料
Firmware Upgrading & Diagnostic Software
DS_BE_WriteReadDvdRw
906
Write data to and read data from a DVD+RW or DVD-RW disc through the
basic engine for verification of the writing
- Send an ATAPI START_STOP_UNIT command to insert the tray
- Send the READ_TOC command
- Generate a random disc location
- Generate test data to write to the DVD+RW
- Transfer the test data to the disc location using PIO mode ATAPI
WRITE_10
- Transfer the test data from the disc location using PIO mode ATAPI
READ_10
- Compare the two data areas and check whether the areas are equal
Approximately 20 seconds
None
Number Description
90600 The command executed successfully
90601 This nucleus cannot be executed because the Self-Test failed
90602 The BE cannot enter normal operating mode
90603 Unable to send the tray in
90604 Unable to read TOC from disc
Invalid disc is loaded, please insert a DVD+RW or DVD-RW
90605 disc
90606 Writing the test pattern to DVD+RW or DVD-RW failed
90607 Reading back the test pattern from DVD+RW of DVD-RW failed
90608 Compare check failed
90609 Calibrating DVD+RW or DVD-RW failed
DS:> 906
090600: DVD+RW test on sector 0x5dbe0: OK
Test OK @
DS:> 906
090600: DVD-RW test on sector 0x304e0: OK
Test OK @
DS_BE_WriteReadDvdR
907
Write data to and read data from a DVD+R or DVD-R disc through the basic
engine for verification of the writing
- Send an ATAPI START_STOP_UNIT command to insert the tray
- Send the READ_TOC command
- Use the OPC area to test if the DVD+R or DVD-R is (still) writable
- Generate test data to write to the DVD+R or DVD-R
- Transfer the test data to the disc location using PIO mode ATAPI
WRITE_10
- Transfer the test data from the disc location using PIO mode ATAPI
READ_10
- Compare the two data areas and check whether the areas are equal
Approximately 20 seconds
None
Number Description
90700 The command executed successfully
90701 This nucleus cannot be executed because the Self-Test failed
90702 The BE cannot enter normal operating mode
90703 Unable to send the tray in
90704 Unable to read TOC from disc
90705 Invalid disc is loaded, please insert a DVD+RW disc
90706 Unable to write, the DVD+R or DVD-R disc is full
90707 No writable DVD+R or DVD-R sector found
90708 Writing the test pattern to DVD failed
90709 Reading back the test pattern from DVD failed
90710 Compare check failed
DS:> 907
090700: DVD+R test on sector 0x36210: OK
Test OK @
DS:> 907
090700: DVD-R test on sector 0x30000: OK
Test OK @