Care & Maintenance - Ninja BL660C Owner's Manual

Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1
Separate/remove all parts from each other.
2
Hand Washing: Wash the lids, pitcher, Nutri Ninja
and blade assemblies in warm, soapy water. When
washing the blade assemblies, use a dish-washing
utensil with a handle to avoid direct hand contact with
blades. Handle blade assemblies with care to avoid
contact with sharp edges. Rinse and air dry thoroughly.
WARNING: Handle the Stacked Blade Assembly
and Nutri Ninja Blade Assembly with care when
washing, as the blades are sharp. Contact with
the blades' edges can result in laceration.
3
Dishwasher: The pitcher, Nutri Ninja cups, lids, Stacked
Blade Assembly and Nutri Ninja Blade Assembly are all
dishwasher safe. It is recommended that the lids and
blade assemblies be placed on the top rack. Ensure
the blade assembly is removed from the cup or pitcher
before placing in the dishwasher.
4
Wipe the motor base clean with a damp cloth.
Please call customer service if any servicing needs to
be performed on the appliance at 1-877-646-5288.
13 1-877-646-5288
HOW TO STORE
1 Store the Ninja
pitcher on the motor base, Stacked Blade Assembly
inside the pitcher and lid locked on the pitcher. Do
not place anything on top. Store the Nutri Ninja Blade
Assembly attached to the Nutri Ninja cup and the rest
of the attachments along side the appliance or in a
cabinet where they will not be damaged and won't
cause a hazard. Insert the power cord into the cord
cups
™
storage area located in the back of the motor base.
Cord Storage
RESETTING THE MOTOR THERMOSTAT
The Ninja Professional Blender features a unique safety
system which prevents damage to the unit's motor and drive
system should you inadvertently overload your appliance.
If the appliance is being overloaded, the motor will
stop. Allow the appliance to cool for approximately
15 minutes. To reset the appliance, follow the resetting
procedure below:
1
Unplug the appliance from the electrical outlet.
2
Remove and empty the container and ensure that no
food is jamming the blade assemblies.
3 Allow the appliance to cool for approximately 15
minutes.
4 Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5 Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
Professional Blender upright with the
®