Assembly & Use Of The Nutri Ninja ™ Cup - Ninja BL660C Owner's Manual

Table of Contents

Advertisement

Available languages

Available languages

Use of the Nutri Ninja
WARNING: Handle the Nutri Ninja Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Nutri Ninja Blade Assembly from the cup upon completion of blending. Some
ingredients have the potential to expand after blending resulting in excessive pressure buildup that can
pose a risk of injury.
ASSEMBLY
Fig. 1
Fig. 2
1
Review warning and caution statements above before
proceeding to number 2.
2
Place the motor base on a clean, dry, level surface such
as a counter or table top.
3
Add ingredients to the Nutri Ninja cup.
4
Place the Nutri Ninja Blade Assembly onto the cup and
screw it tightly until you have a good seal. (Fig. 1)
5
Turn the Nutri Ninja cup upside down and place it
onto the motor base, aligning the tabs on the cup with
the motor base. Turn the Nutri Ninja cup clockwise to
lock into place. You will hear a click when the lock is
engaged. (Fig. 2)
6
Press down on the Single Serve button in short
intervals to activate. (Fig. 3)
Cup
®
USE
Fig. 3
For best results, use short "PULSES"... Practice makes perfect!!
Fig. 4
7
When you have reached your desired consistency,
stop the appliance by removing your hand from the
Single Serve button. To remove the Nutri Ninja cup turn
it counter-clockwise (Fig. 4) and pull straight up to
remove. (Fig. 5)
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the "Max" fill line.
8
Turn the cup upright and remove the Nutri Ninja Blade
Assembly by twisting the blade assembly to the left.
9
Place the To-Go lid onto the Nutri Ninja cup, twist to
seal and enjoy!
10 Make sure that the motor base is unplugged when not
in use.
REMOVAL
Fig. 5
ninjakitchen.com
EN
12

Advertisement

Table of Contents
loading

Table of Contents