Please note that all adjustments should be done at your local SCOTT dealer or following to this manual. BB Standard and FD Mount Standard......08 Headset Options .
Front brake Compatible with both SHIMANO SCOTT’s focus was not only on the frame and rider aerodynamics but also on the direct mount and single bolt front bike’s ergonomic side and adjustability as well as the frame front end stiffness.
- Rear derailleur hanger: place the rear derailleur hanger in the cavity and tighten the 2x M5 screws to their specified torques. Rear derailleur hanger: SCOTT Part number 239178 Drop out adjustment screws: Standard M5*10mm headless screw available in any hardware shop.
BB STANDARD AND FD MOUNT STANDARD The BB standard on Plasma 4 is PF86. FD Mount Standard: Brazed on standard same as other SCOTT road frames: Solace, Addict or Foil. HEADSET OPTIONS Plasma 4 headset Syncros Drop-In 1 1/8” black part number: 238600 Bearings standard: IS41/28.6 | IS41/30...
Seatpost and seatclamp assembly are fully compatible between Plasma 4 and Plasma 5 frames. - Seatpost Plasma 4/5 SCOTT part number: 239318 - Seat Clamp Plasma 4/5 SCOTT part number: 239544 PLASMA 4 | BIKE OWNER’S MANUAL 2015 BIKE OWNER’S MANUAL 2015 |...
Doing so SCOTT warrants its frames and swingarms for five years (subject to compliance with maintenance ranges, see below) and SCOTT forks (provided it is a fork of SCOTT) for two years for defects in material and/or workmanship in case of purchase of completely Year .
Need help?
Do you have a question about the Plazma 4 and is the answer not in the manual?
Questions and answers