Yamaha YP250 5GM2-AE1 2000 Service Manual page 72

FRONT WHEEL
2. Install:
: Sensor housing
3. Install:
: Front wheel
: Wheel axle
: Axle nut
NOTE:
Align the slot of sensor housing with the projec-
tion part of front fork, then assemble them.
CAUTION:
Install after checking if foreign materials are
mixed in the wheel hub. If foreign materials
are mixed, it causes to damage the sensor
rotor and speed sensor.
4. Install:
: Speed sensor 1
: Brake caliper 2
: Clamp 3
NOTE:
When installing the speed sensor, check if the
speed sensor lead is twisted or foreign matters
attached to the electrode.
CAUTION:
To route the speed sensor lead, refer to the
CABLE ROUTING.
62
CHAS
70 Nm (7.0 m:kg)
23 Nm (2.3 m:kg)
50 Nm (5.0 m:kg)