Speed Sensor Assembly - Yamaha YP250 5GM2-AE1 2000 Service Manual

FRONT WHEEL
2. Measure:
: Speed sensor resistance
Connect the pocket tester (Ω
minal of speed sensor connector.
Tester's positive (+) lead ! Terminal 1
Tester's negative (–) lead ! Terminal 2
Regulated resistance:
1.19 to 2.21 kΩ at 20_C
Out of specification ! Replace
3. Check:
: Sensor rotor 1
Cracks and damage ! Replace the wheel
assembly
NOTE:
Sensor rotor of YP250 is inserted under pres-
sure by the special process and cannot be re-
placed as a single unit. To replace the sensor ro-
tor, replace it as a wheel assembly.

SPEED SENSOR ASSEMBLY

Proceed in the reverse order of disassembling
paying attention to the following items.
1. Apply:
: Litium soap base grease
1 Wheel axle
61
CHAS
1) to the ter-