Maximum Floor Temperature Setting - DEVI Devireg 530 Instruction Manual

2. Maximum floor temperature setting

Maximum floor limiter is preset at the factory to 35°C
for cable temperature safety.
All product approvals must be observed when
changing the maximum preset limiter.
You can reset the floor limiter on the Devireg™ 532
by taking off the front cover and with
a screwdriver adjust the sunken temperature dial
in the top left hand corner.

For wooden floor constructions DEVI™ recommend
the temperature is limited to a maximum of 30°C.
Maximum limiter setting for different floor
constructions:
Tiles on timber
Carpet/vinyl on timber
Wooden floors (parquet, plank, etc.)
Tiles on concrete or screed
30°C
35°C
27°C
35°C