Setting The Speaker Impedance - Yamaha RX-V581 Owner's Manual

n
Notes on installation of ceiling speakers
When installing presence speakers to a ceiling, install them just above the listening
position, or the ceiling between the extensions of the front speakers and listening
position.
FPR SR
FR
C
FL
FPL SL
Notice
▪ Be sure to use speakers that are made for ceiling use and take anti-drop measures. Ask a qualified
contractor or dealer personnel for installation works.

Setting the speaker impedance

(U.S.A. and Canada models only)
Under its default settings, the unit is configured for 8-ohm speakers. When connecting
6-ohm speakers, set the speaker impedance to "6 Ω MIN".
1
Before connecting speakers, connect the power cable to an AC
wall outlet.
2
While holding down STRAIGHT on the front panel, press z
(power).
z
(power)
STRAIGHT
3
Check that "SP IMP." is displayed on the front display.
CHARGE
OUT 1 2
ECO
SP IMP.••8¬MIN
4
Press STRAIGHT to select "6 Ω MIN".
5
Press z (power) to set the unit to standby mode and remove the
power cable from the AC wall outlet.
You are now ready to connect the speakers.
20
En
ENHANCER STEREO TUNED PARTY SLEEP MUTE
ZONE ZONE
2 A 3 B
VOL.
ADAPTIVE DRC VIRTUAL