Care & Maintenance - Ninja Ultima BL820NZ Owner's Manual

Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base
is unplugged from the power source before
inserting or removing any attachment and
before cleaning.
CAUTION: DO NOT immerse the motor base
into water or any other liquid.
1 Separate/remove all parts from each other.
2 Clean the motor base with a damp cloth and
wipe dry.
3 Place the pitcher, bowl and single serve
cup in the dishwasher. Place the lids and
attachments on the top rack. Use caution
when handling the blade assemblies as
the blades are very sharp. Always hold
the top blades and chopping blade by the
shaft.
NOTE: You may also wash the containers by
filling ¾ of the container with warm water
and a drop of dish washing detergent, placing
the lid or single serve blade assembly on and
pressing the pulse button a few times. Once
clean, remove the container from the motor
base. Rinse the pitcher, bowl, single serve cup
and lids under running water. Allow all the
parts to dry before storing.
Please call customer service if any servicing
needs to be performed on the appliance.
HOW TO STORE
1 Store the Ninja Ultima
the pitcher on the motor base, top blades
inside the pitcher and lid on the pitcher. Store
the Chopping blade in the 1.8 L bowl with the
lid on the bowl. Store the discs and dough
blade in a secure location.
RESETTING THE MOTOR THERMOSTAT
The Ninja Ultima
™
safety system which prevents damage to the
unit's motor and drive system should you
inadvertently overload your appliance. If the
appliance is being overloaded, the motor
will stop. To reset the appliance, follow the
resetting procedure below:
1 Unplug the appliance from the electrical
outlet.
2 If using the top blades or the chopping blades,
carefully remove them by the shaft, ensuring
that no food is jamming the top or bottom
cutting blades.
CAUTION: The blades are extremely sharp
- handle with care! Always hold the top
blades and chopping blades by the shaft.
3 Allow the appliance to cool for approximately
15 minutes.
4 Re-install the container onto the base,
carefully re-insert the top blades (if using) and
re-plug the appliance into the electrical outlet.
NOTE: Ensure that the blades are seated
properly by standing the blades upright in
the jar. If the blades are not seated properly
on the star-shaped post, carefully check the
underside of the top blade assembly to ensure
there's no food in the way. Rinse if necessary.
Do not operate if the top blades are not
upright at any time.
5 Proceed to use the appliance as before,
making sure not to exceed the recommended
maximum capacities.
CUSTOMER CARE - AU: 1800 890 840
System upright with
™
System features a unique
16