SHOCK OR INJURY: FOLLOWING: 1. To protect against electrical shock, do READ ALL INSTRUCTIONS BEFORE USING not submerge the appliance or allow the YOUR NINJA ULTIMA SYSTEM. ™ power cord to come into contact with water or any other liquid.
Page 3
11. Keep hands, hair, clothing, as well as 23. DO NOT expose containers to extreme utensils out of container while processing temperature changes. or blending to reduce the risk of severe 24. CAUTION: DO NOT process hot foods injury to persons or damage to the or hot liquids.
Page 4
1500 Watts Max ON time is 30 seconds under 1500W load Pitcher Capacity: 2.1 Litres Max. liquid 1.8 Litres Single Serve Capacity: 470 ml Bowl Capacity: 1.8 Litres Euro-Pro, Ninja, Ultima and Ninja Ultima are trademarks of Euro-Pro Operating LLC.
Contents Thank you for Getting to Know Your Ninja Ultima System ........... 5 ™ purchasing the Using the Ninja Ultima System ............7 ™ Ninja Ultima ™ Assembly and Use for the Pitcher ............8 System. Assembly and Use for the Single Serve Cup ........... 10 Assembly and Use for the Bowl ..............
Getting To Know Your Ninja Ultima System ™ a Single Serve Drink Cup (x2) f Dough Blade (bowl) l Pitcher b Single Serve Blade g Chopping Blade (bowl) m Lid with Locking Handle (pitcher) c Sip & Seal™ To-Go Lids (x2)
Page 7
The Ninja Ultima System features a dual blade system and 3 peak horsepower motor for culinary ™ precision at home. For best results, be sure to carefully read all the instructions contained in the manual before using this appliance. FEATURES: •...
Page 8
Using the Ninja Ultima System ™ PLEASE KEEP THESE IMPORTANT SAFEGUARDS IN MIND WHEN USING THE APPLIANCE: IMPORTANT: DO NOT push food into the food chute with your fingers. Always use the food pusher provided. CAUTION: Avoid contact with moving parts.
Assembly and Use for the Pitcher Assembly Fig. 1 Fig. 3a Fig. 4 Fig. 2 Fig. 3b Fig. 5 TIP: When pureeing, use only the bottom blades IMPORTANT: Make sure that the motor base is for best results. plugged in for use. NOTE: The bottom blades are not removable.
Page 10
Assembly and Use for the Pitcher - cont. WARNING: Never leave the appliance unattended while in use. REMOVAL Fig. 6 Fig. 7 Fig. 8 CAUTION: Never insert your hands in the pitcher 7 Plug the motor base in for use. as the blades are sharp.
Assembly and Use for the Single Serve Cup ASSEMBLY PULSE REMOVAL Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 For best results, use short “PULSES”... Practise makes perfect!! 6 When you have reached your desired IMPORTANT: Make sure that the motor base consistency, turn the single serve cup counter- is plugged in for use.
Assembly and Use for the Bowl WARNING: Never leave the appliance unattended while in use. ASSEMBLY Fig. 14 Fig. 16a Fig. 17 Fig. 15 Fig. 16b Fig. 18 7 Holding the lid from the feed chute, place it on top IMPORTANT: Make sure that the motor base is of the bowl and turn clockwise aligning the arrow plugged in for use.
REMOVAL Fig. 19 Fig. 20 Fig. 21 Fig. 22 USING THE CHOPPING BLADE ASSEMBLY USING THE DOUGH BLADE 1 Holding the Chopping Blade Assembly by the shaft, 1 Place the motor base on a clean, dry, level surface place it onto the star-shaped post inside the bowl. such as a counter or table top.
Assembly and Use for the Bowl - cont. USING THE DISCS IMPORTANT: Use only the “DOUGH/DISC” setting when mixing dough or using either disc. IMPORTANT: Use ONLY the Feed Chute Lid when using the discs. 1 Place the motor base on a clean, dry, level surface such as a counter or table top.
*TIPS: • Top blades are needed to power through tough ingredients like ice, solid fruits and vegetables. If silky smooth results are desired, push the power toggle down to turn off the unit. Carefully remove the top blades by lifting from the shaft, replace the lid and press the power toggle up to continue processing with only the bottom blades.
Care & Maintenance HOW TO STORE HOW TO CLEAN 1 Store the Ninja Ultima System upright with the CAUTION: Make sure that the motor base is ™ pitcher on the motor base, top blades inside the unplugged from the power source before inserting pitcher and lid on the pitcher.
Troubleshooting Guide PROBLEMS POSSIBLE REASONS & SOLUTIONS Make sure the pitcher, bowl or single serve cup is securely placed on motor base. Make sure the lid is securely on pitcher in the correct position (align arrows). The appliance is turned “Off”. Turn the Variable Speed Dial to the desired speed setting, press up on the power toggle and press the Start toggle switch up to turn “On”.
Need help?
Do you have a question about the BL820UK and is the answer not in the manual?
Questions and answers