Menu; Digital Output Off; Advanced Operations; Audio Ex Selection - Marantz cd5003 User Manual

ENGLISH

ADVANCED OPERATIONS

MENU

The following functions can be selected and set.
During stop, press the MENU button on the remote
controller. Press the 7 or 8 button on the remote
controller to select the desired item.
Peak (page 21)
7 8
Edit (page 22)
7 8
MP3/WMA Mode (page 26)
7 8
Digital Out (page 24)
7 8
Quick Replay (page 15)
24

DIGITAL OUTPUT OFF

If digital output is not to be used, turn digital output
OFF, and you can enjoy higher-quality sound.
7 Setting digital output ON or OFF
1.
During stop, press the MENU button on the
remote controller once then the 7 button three
times. "Digital Out" appears.
8 7
2.
Press the ENTER button on the remote
controller.
The current settings appear on the display.
(At the factory, digital output is set to ON.)
Press the ¢/4 buttons to switch digital
3.
output ON or OFF.
4.
Press the ENTER button after making a
setting.
Normal display is resumed.

AUDIO EX SELECTION

For higher-quality sound, select the Audio EX setting, referring the table below.
Audio EX changes as shown below each time the SOUND MODE button on the remote controller is pressed
during stop.
Audio EX OFF
Audio EX 1
Audio EX 2
Sound mode Pitch control
Audio EX OFF:
A digital signal is output only when Usable
the pitch control setting is 0.
Audio EX 1:
When first purchased. Not usable
Audio EX 1 offers better sound.
Audio EX 2:
Audio EX 2 offers best sound from Not usable
analog outputs.
(*1) Setting of Digital Out on the MENU (page 24) takes priority.
(*2) Pressing the DISPLAY button on the remote controller shows the display for three seconds.
(When first
purchased)
Digital output Display
Yes (*1)
(when the pitch
Yes
control setting is
0)
Yes (*1) Yes
No (during play)
No
(*2)