Program Edit - Marantz cd5003 User Manual

ADVANCED OPERATIONS –AUDIO CD–

7 Program edit

This procedure allows you to record tracks in any
desired order while fitting the tracks into a specified
tape length.
1.
Program tracks according to "PROGRAM
PLAY" (page 16).
2.
The rest of the program edit procedure is
the same as step 1 to 4 in the simple edit
procedure.
7 Delete program edit
When recording from a disc to a tape, this procedure
allows you to omit the tracks you do not want to
record, while fitting the tracks into a specified tape
length.
1.
Program tracks according to "DELETE
PROGRAM PLAY" (page 17).
2.
The rest of the delete program edit procedure
is the same as step 1 to 4 in the simple edit
procedure.
Note:
• During a simple edit, program edit or delete
program edit, only STOP, OPEN/CLOSE or
POWER ON/STANDBY button operations can
be performed. (Remote-controlled operation is
not possible)
This is intended to prevent mistakes in recording
due to erroneous operation.
• The display is always in the time display mode
during edit play. It is not possible to switch to the
text display mode.
7 Edit recording
– Recording to a cassette deck
1.
After setting up, setup the cassette deck to rec
pause state.
2. Press 3 or 8 buttons of the player to start A side
program. The player sends out signal to start
recording and starts playing A side program
after 4 seconds.
PHONES LEVEL
- +
3.
After A side program complete, player turns
to the pause state at the beginning of B side
program.
4.
Tur n the cassette tape over and star t
recording.
Press 3 or 8 buttons of the player manually to
5.
start B side recording. Player sends out signal
to restart recording and starts playing B side
program after 4 seconds.
PHONES LEVEL
- +
6.
After B side program complete, player stops
playing and clears edit program automatically.
ENGLISH
23