D-Link DSL-G604T Quick Installation Manual page 11

Hide thumbs Also See for DSL-G604T:
Table of Contents

Advertisement

To configure the default connection type (PPPoA) for Connection 1,
follow the steps listed below. To change the connection type of
Connection 1 to an alternative type follow the instructions according to
the desired type as described below in Change the Connection Type.
1. Click the Connection 1 button under WAN Setup to view the
PPPoA Connection Setup menu pictured in the example above.
2. Type in a Name (WAN_PPPoA has been entered here) for the
connection or use the default name in the space provided.
3. Under Options, enable NAT and/or Firewall by selecting the
corresponding selection box.
4. If you are told to change the VPI or VCI values, type in the values
given to you by your service provider. Many users will be able to
use the default settings.
Leave the default QoS values if you are unsure or the ISP did not
5.
provide this information
6. Do not change the PCR or SCR values unless you are required
to do so. If you are told to change these, type in the values given
to you by your service provider.
.
11

Advertisement

Table of Contents
loading

Table of Contents