Macro Keys; Steps You Can Program Into A Macro Key - Muratec F-315 User Manual

Macro keys

If you perform the same operation repeatedly, you can automate the operation using a
macro. A macro is a series of the several steps that you group together as a single com-
mand to accomplish the operation automatically.
A macro key faithfully records up to 60 steps.
NOTE: • Changes to an existing speed dial number or adding a new speed dial number will
not carried over to previously configured Macro Programs. The Macro Program
will have to be reprogrammed to reflect the changes/editions to the speed dial
directory.
• Press <Reset> first when you use other functions within a few minutes after
Macro was executed.

Steps you can program into a macro key

You can "teach" the macro keys to carry out any of the following jobs.
Copy:
• All copying procedures
Printouts:
• List printing (<Menu>, <5>, <1>, <01> to <19>)
• Document stored for polling (<Menu>, <4>, <3>, <1>)
• F-code document stored in bulletin box (<Menu>, <4>, <3>, <2>)
• Document stored in a batch box (<Menu>, <4>, <3>, <3>)
• Security receive document (<Menu>, <4>, <3>, <4>)
• Document stored for delayed command (<Menu>, <4>, <3>, <5>)
Document storage:
• Regular polling documents (<Menu>, <4>, <1>, <1>)
• F-code box (bulletin box) documents (<Menu>, <4>, <2>, <2>)
Communications functions:
• Delayed transmission (pages 4-13)
• Broadcasting (page 4-12)
• Regular polling (page 4-18)
• Batch transmission (page 4-14)
• F-code transmission (page 6-11)
• F-code polling (page 6-12)
NOTE: One macro key can hold only one job. It cannot combine two or more jobs.
8-4 s
pecIaL features

Macro keys

MFX-1950 control panel