Gigaset SL450 User Manual page 9

Base
2
3
•
Insert the phone cable into the right-hand connection socket
it clicks into place.
•
Insert the power cable from the power adapter into the connection socket on the left
•
Push both cables into the appropriate cable channels
•
Place the cover in the notches on the back of the base
•
Connect the power
•
Connect the phone
The network cable must always be connected in order to function, as the phone will
not operate without a power supply.
Handset
Connecting the charging cradle (if included)
¤
Connect the flat plug of the power adapter
¤
Plug the mains unit into your power socket
To remove the plug from the charging cradle
again:
¤
Disconnect the power adapter from the mains
power supply.
¤
Press the release button
¤
Pull out the plug
5
1
adapter
4
5 jack
.
3
.
4
3a
4
3
.
3a (not if mounting on the wall).
.
1
.
2
2
1 at the rear of the base until
1
Base
.
2
4
3
7