Gigaset SL450 User Manual page 32

Directory
Copying individual entries
¤
. . . use
Internal OK
Copy the next entry after successful transfer:
Use vCard via SMS to send a directory entry in vCard format by SMS.
Copying the entire directory
¤
Options
receiving handset
Copying a vCard using Bluetooth
Copy directory entries in vCard format, e.g. to exchange entries with a mobile phone.
Bluetooth mode is activated
The other handset/mobile phone supports Bluetooth.
¤
. . . use
vCard via Bluetooth . . . the Known Devices list is displayed
device OK
Receiving a vCard using Bluetooth
If a device in the Known Devices list sends a vCard to your handset, a directory entry is
automatically created and a message is shown in the display.
If the sending device is not in the list:
device OK . . . the copied vCard is available as a directory entry
Synchronising the phonebook with the PC address book
(Gigaset QuickSync)
The Gigaset QuickSync programme has been installed on the computer.
The handset is connected via Bluetooth or via a USB data cable to the computer.
Free download and further information at
30
to select the desired entry
. . . use to select the receiving handset
Copy List OK
OK . . . the entries are copied one after the other
to select an entry if needed
. . . use
Options
Press Yes or No
to Internal OK
Options
to enter the PIN of the sending Bluetooth
www.gigaset.com/quicksync
Copy Entry OK
OK . . . the entry is copied
. . . use to select the
Copy Entry / Copy All
. . . use to select
to