Table of Contents
Advertisement
vi
Terms and Symbols for the Type of Originals and Copy Paper
A few special terms and symbols are used in this manual to designate types of originals and copy
paper. This page explains about these terms and symbols.
Feeding Direction (copy paper path)
In this copier system, copy paper is taken up from the left-hand side of the copier and fed through
the copier toward the right-hand side, face up onto the Copy Tray. In the figure below, the direction
in which the copy paper is fed, as indicated by the arrow, is called the "feeding direction."
"Width" and "Length"
1139O1610A
Terms and Symbols Used
1139O1610A
1139O1620A
1139O1610A
When we talk about the size of the original or copy, we call side
A "width" and side B "length."
A: Width
B: Length
<Lengthwise
>
When the original or copy has a "length" longer than its
"width," we call it "lengthwise" and use symbol "L" or "
<Crosswise
>
When the original or copy has a "length" shorter than its
"width," we call it "crosswise" and use symbol "C" or "
1151O107AA
."
."
Advertisement
Table of Contents
