Turning On And Off And Initial Mode; Turning On And Off; Initial Mode - Develop D2150 Operator's Manual

4. Turning ON and OFF and Initial Mode

Turning ON and OFF

When Copier is Turned ON
The Wait Indicator lights up on the
control panel and the Start Key turns orange,
indicating that the copier is now warming up.
Loading the originals onto the Automatic /
Duplexing Document Feeder and pressing the
Start Key can set the copier into the Auto Copy
Start Function. p. 16
1 2
4 5
7 8
S
Auto
0
A3
B4
A4 B5
Start
FLS.
A4
Inch
A5
Paper
Start Key : Orange Light

Initial Mode

When the Power Switch is turned ON, the initial settings are indicated on the control panel.
* The initial settings serve as the reference for all control panel settings to be later made.
No. of copies
selected
Zoom Ratio
Paper
* The initial setting of the Orig.
equipped with a Duplex Unit.
Useful Tip
The initial mode can be changed. For details, see User's Choice.
Turning Copier ON
Press the Power Switch to the I (ON) position.
Turning Copier OFF
Press the Power Switch to the
The Auto Shut OFF function will automatically
shut down the copier a given period of time
after the last activity (see p. 16).
1139O2060A
In about 30 seconds, the Wait Indicator goes
out, and the Start Key turns green. Now, the
copier is ready to make copies.
3
6
9
C
Stop
1139O4702A
1139O4702A
: 1 Exposure
: 1.000 Orig.
: Auto Paper Finishing
Copy Mode is 1-sided original
NOTE
1 2
4 5
7 8
S
Auto
0
A3 B4
A4 B5
Start
FLS.
A4
Inch
A5
Paper
Start Key : Green Light
: Auto Exposure
Copy : From 1-sided
original to 1-sided
copy
: Non-Sort
2-sided copy if your copier is
p. 52
15
(OFF) position.
3
6
9
C
Stop
1139O4722A
1139O4722A