Selecting The Finishing Mode - Develop D2150 Operator's Manual

42
8. Finishing Mode

Selecting the Finishing Mode

Sort/Sort-and-Staple/Group Mode
(To sort or group copies)
Press the Finishing Key to select the
1
desired mode.
Sort &
Staple
Group
Finishing
•
Each time the Key is pressed, the
newly selected finishing mode
indicator lights.
•
If there are no lights, the Non-Sort
Mode is selected.
NOTE
•
Capacity of each Sorter Bin
(Non-Sort Mode)
Sorter Bin
1st Bin
2nd to 10th Bin
(Sort/Group/Sort-and-Staple Mode)
Sorter Bin
1st to 10th Bin
•
Thick paper, translucent paper, and
OHP transparencies cannot be used
for making copies in the Sort, Group,
or Sort-and-Staple Mode.
(To staple copy sets already made in the Sort
Mode or copy stacks made in the Group Mode.)
1151O087CA
Capacity
Up to 50 sheets
Up to 25 sheets
Capacity
Up to 25 sheets
Using the Manual Staple Mode
Make sure that each copy set or stack
1
has been fed into the Sorter Bin.
Press the Manual Staple Key.
2
Then the copy set or stack in the Sorter
Bin will be stapled.
Manual
Staple
1139O2732A
1139O2732A