Table of Contents
Advertisement
10. Cover Mode
The Cover Mode lets you make a front cover for a copy set by copying the first page of an
original set on a different type of paper, such as color paper. It may be used to differentiate
the cover of a copy set from other pages.
Original Set
NOTES
•
This mode can only be selected when the copier is equipped with the Automatic/Duplexing
Document Feeder and the Multi Bypass Tray.
•
This mode cannot be selected when 1-sided
1-sided, or Book
2-sided Mode is Selected.
Using the Cover Mode
Place the paper stack for the cover
1
sheet on the Multi Bypass Tray.
NOTES
•
Be sure to place the paper stack for the
cover sheet on the Multi Bypass Tray.
•
Capacity of the Multi Bypass Tray
Plain paper. . . . . . . . .Up to 50 sheets
Thick paper, transparencies,
translucent paper . . . .Up to 20 sheets
2-sided, 1-sided
Load the originals into the
2
Automatic/Duplexing Document
Feeder.
1139O0140A
Press the Cover Key to set the Cover
3
Mode.
Copy Set
Special paper
2-sided (2in1), Book
1151O016AA
Cover
1139O2562A
47
1076O181
1139O2562A
Advertisement
Table of Contents
