When The Add Staples Indicator Lights Up - Develop D2150 Operator's Manual

64
3.

When the Add Staples Indicator Lights Up

0.5~2.0
Auto
A4 A3
Auto
B4 A3
Photo
Full Size
B4 A4
Darker A3 A4
/ Photo Full Size
A
Replacing the Staple Cartridge
1 Press the Lock Release Lever of the
Staple Sorter and slide it away from
the copier.
Open the Stapler Door.
2
While lifting the Lever upward, pull
3
the Staple Cartridge out of its port.
Pull the staple belt about 1" out of the
4
new Staple Cartridge and break off that
portion.
When the staples will soon run out, the Add
Staples Indicator lights up.
Replace the Staple Cartridge with a new one by
Auto
following the procedure given below.
A3
B4
A4 FLS.
Inch
A4
A5
Paper
1151O073DA
1151O073DA
1139O0490A
5
1139O2190A
6
1139O0970A
NOTE
Check that no portion of the staple belt
hangs out of the Cartridge. Break off
any portion of the belt that hangs out of
the Cartridge.
Insert the new Staple Cartridge until it
clicks into position.
Close the Stapler Door and slide the
Staple Sorter back against the copier.
1139O1350A
1139O1440A