When The Add Toner Indicator Lights Up - Develop D2150 Operator's Manual

2.

When the Add Toner Indicator Lights Up

0.5~2.0
Auto
A4 A3
Auto B4 A3
Photo
Full Size
B4 A4
Darker A3 A4
uto / Photo Full Size
A
Replacing the Toner Bottle
Open the Front Door.
1
Swing open the Toner Bottle Holder
2
and pull out the Toner Bottle.
Shake a new Toner Bottle well.
3
With the Seal on the Toner Bottle
4
facing up, slowly peel off the Seal as
illustrated.
The Add Toner Indicator lights up when toner
in the Toner Bottle is running out.
You can still make copies, but the image
Auto
A3 B4
density will become lighter and lighter. It is
A4 FLS.
recommended, therefore, that you replace the
Inch
A4
A5
Toner Bottle with a new one as soon as
Paper
possible.
1151O072DA
1151O072DA
5
1139O1380A
6
1139O1410A
1139O1420A 1139O1390A
NOTE
Be careful, some toner may puff out from
the bottle.
Ensuring that the arrows (
Toner Bottle are facing you, insert the
Bottle into position.
NOTE
Insert the Bottle all the way into the
copier until the marking on the
Bottle is aligned with the
on the Toner Bottle Holder.
Swing the Toner Bottle Holder closed
and close the Front Door.
NOTE
•
Use ONLY the specified toner for this
copier. Using any other toner could
result in image trouble.
Auxiliary Toner Replenisher Mode
Use the Auxiliary Toner Replenisher
Mode if the image is light immediately
after the Toner Bottle has been replaced
with a new one. p. 51
63
Ö
) on the
1139O1420A
marking