Adjust System Settings; Turn Beep Sound On/Off; Select Blackout Setting; Turn Demo Mode On/Off - Philips cem5100 User Manual

2
Press again to select an option.

Other sound settings

You can also adjust the preset EQ / AUDIO
settings.
1
Press EQ / AUDIO for 3 seconds.
2
Press or repeatedly to select the item
to be adjusted:
[SUBWOOFER ON/OFF] : Rotate
•
to turn on or off the subwoofer.
[SUBWOOFER] range: 0 to 12.
•
• [SUBWOOFER LPF] (Subwoofer low
pass filter) range: 80, 120, 160.
[BALANCE] range: 12L to 12R.
•
(L=left speaker, R=right speaker)
[FADER] range: 12R to 12F. (R=rear
•
speaker, F=front speaker)
[BASS] range: -7 to +7.
•
• [BASS CFQ] (bass center frequency)
range: 60, 80, 100, 200.
• [MIDDLE] range: -7 to +7.
[MIDDLE CFQ] (middle center
•
frequency) range: 0.5k, 1.0k, 1.5k, 2.5k.
[TREBLE] range: -7 to +7.
•
[TREBLE CFQ] (treble center
•
frequency) range: 10.0k, 12.5k, 15.0k,
17.5k.
• [RESUME] : Resume the preset EQ
value to factory default value.
3
Rotate to select a value.
9 Adjust system
settings

Turn beep sound on/off

Each time you press a button, the unit beeps.
You can turn the beep sound on/off.
1
Press and hold MENU.
2
Press or repeatedly until [BEEP] is
displayed.
3
Rotate to select a setting:
[BEEP ON]: turn on the beep sound.
•
[BEEP OFF]: turn off the beep sound.
•

Select blackout setting

You can set the screen to turn off automatically,
after the unit is idle for 10 or 20 seconds.
1
Press and hold MENU.
2
Press or repeatedly until [BLACK
OUT] is displayed.
3
Rotate to select a setting:
[BLK OUT 10 S] : turn off the screen
•
automatically 10 seconds after last
operation.
[BLK OUT 20 S] : turn off the screen
•
automatically 20 seconds after last
operation.
• [BLK OUT OFF] : never turn off the
screen.

Turn demo mode on/off

1
Press and hold MENU.
2
Press or repeatedly until [DEMO] is
displayed.
» The screen shows current demo mode
setting.
EN
23