Philips cem5100 User Manual page 9

Note on the power supply lead (yellow)
• When you connect other devices to this
apparatus, ensure that the rating of the car
circuit is higher than the total fuse value of
all the connected devices.
Notes on speaker connection
• Never connect speaker wires to the metal
body or chassis of the car.
• Never connect speaker wires with stripes
to one another.
Connection: for cars with ISO
connectors
Caution
•
Ensure that all loose leads are insulated with electrical
tape.
Note
•
Consult a professional to connect CEM5100 as
instructed below.
1
Connect the supplied male connector to
the unit.
2
Check the car's wiring carefully and
connect them to the the supplied male
connector.
Note
•
Risk of danger! Please consult a professional to perform
the steps below!
EN
10
1 Green/black
strip
2 White/black
strip
3 Gray/black
strip
4 Purple/black
strip
e Red
f Blue
g Blue/white
h Black
i Yellow
3
Connect the antenna and amplifier as
illustrated, if applicable.
Left speaker (Rear)
Left speaker (Front)
Right speaker (Front)
Right speaker (Rear)
Ignition key +12V DC
when ON/ACC
Motor/electric antenna
relay control lead
Amplifier relay control
lead
Ground
To the +12V car
battery which is
energized at all times