Table of Contents
Advertisement
Other sound settings
You can also adjust the preset EQ / AUDIO
settings.
1
Press EQ / AUDIO for 3 seconds.
2
Press
or
repeatedly to select the item
to be adjusted:
• [SUBWOOFER ON/OFF] : Rotate
to turn on or off the subwoofer.
• [SUBWOOFER] range: 0 to 12.
• [SUBWOOFER LPF] (Subwoofer low
pass filter) range: 80, 120, 160.
• [BALANCE] range: 12L to 12R. (L=left
speaker, R=right speaker)
• [FADER] range: 12R to 12F. (R=rear
speaker, F=front speaker)
• [BASS] range: -7 to +7.
• [BASS CFQ] (bass center frequency)
range: 60, 80, 100, 200.
• [MIDDLE] range: -7 to +7.
• [MIDDLE CFQ] (middle center
frequency) range: 0.5k, 1.0k, 1.5k, 2.5k.
• [TREBLE] range: -7 to +7.
• [TREBLE CFQ] (treble center
frequency) range: 10.0k, 12.5k, 15.0k,
17.5k.
• [RESUME] : Resume the preset EQ
value to factory default value.
3
Rotate
to select a value.
7 Adjust system
settings
Turn beep sound on/off
Each time you press a button, the unit beeps.
You can turn off/on this beep sound.
1
Press MENU.
2
repeatedly until [BEEP] is
Press
or
displayed.
3
Rotate
to select a setting:
• [BEEP ON]: Turn on the beep sound.
• [BEEP OFF]: Turn off the beep sound.
Select blackout setting
You can set the screen to turn off automatically
after the unit is idle for 10 or 20 seconds.
1
Press MENU.
2
Press
or
repeatedly until [BLACK
OUT] is displayed.
3
Rotate
to select a setting:
• [BLK OUT 10 S] : Turn off the screen
automatically 10 seconds after last
operation.
• [BLK OUT 20 S] : Turn off the screen
automatically 20 seconds after last
operation.
• [BLK OUT OFF] : Never turn off the
screen.
EN
19
Advertisement
Table of Contents
