Cub Cadet CCH410 Instruction Manual page 4

BREATHING PROTECTION
BODY PROTECTION
ELECTRICAL SAFETY
WARNING:
the tool, use proper circuit protection.
The charger for this tool is wired at the factory for 120 V operation. It must be
connected to a 120 V, 15 A circuit that is protected by a time-delayed fuse or
circuit breaker. To avoid shock or fire, replace the power cord immediately if it is
worn, cut or damaged in any way.
OWNER'S REGISTRATION
Please register your product online at www.cubcadet.com (in the United
States) or www.cubcadet.ca (in Canada).
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
GENERAL SAFETY WARNINGS
WARNING:
Always wear breathing protection.
WARNING:
Always wear non-slip gloves that fit properly to
protect your hands and to help you grip the tool.
WARNING:
Always wear sturdy clothing with long sleeves
and long pants. Never operate the tool while wearing shorts,
short sleeve shirt or while shirtless.
WARNING:
Always wear non-slip safety boots to prevent foot
injuries and slipping that could cause loss of control of the tool.
To avoid electrical hazards, fire hazards or damage to
4