Cellular Result Codes +Crc; Dte-Dce Local Rate Reporting +Ilrr - Multitech MMCModem GPRS (MTMMC-G) Reference Manual

Cellular Result Codes +CRC

Description:
This command shows more detailed ring information for an incoming call (voice or data). Instead of the
string "RING", an extended string is used to indicate which type of call is ringing (e.g. +CRING: VOICE).
These extended indications are:
+CRING: ASYNC
+CRING: REL ASYNC
+CRING: VOICE
Values: <mode>
Syntax: Command syntax: AT+CRC=<mode>
Command
AT+CRC=0
Note: Extended reports disabled
AT+CRC=1
Note: Extended reports enabled
AT+CRC?
AT+CRC=?

DTE-DCE Local Rate Reporting +ILRR

Description:
This parameter controls whether or not the extended-format "+ILRR:<rate>" information text is
transmitted from the DCE to the DTE. The <rate> reported represents the current (negotiated or
renegotiated) DTE-DCE rate.
If enabled, the intermediate result code is transmitted in an incoming or outgoing data call, after any
data compression report, and before any final result code (CONNECT).
Values: <value>
<rate> Can take the following values: 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Syntax: Command syntax: AT+ILRR = <value>
Command
AT+ILRR=0
Note: Local port rate report disabled
AT+ILRR=1
Note: Local port rate report enabled
AT+ILRR?
AT+ILRR=?
Multi-Tech Systems, Inc. Wireless GSM/GPRS AT Commands (Document Number S000293I)
for asynchronous transparent
for asynchronous non-transparent
for normal speech.
0 Disable extended reports
1 Enable extended reports
0 Disable local port rate report
1 Enable local port rate report
Kbps.
Possible responses
OK
Note: Command valid
OK
Note: Command valid
+CRC: 1
OK
+CRC: (0,1)
OK
Possible responses
OK
Note: Command valid
OK
Note: Command valid
+ILRR: 1
OK
+ILRR: (0,1)
OK
Chapter 11 – Data Commands
95