Connected Line Identification Presentation +Colp - Multitech MMCModem GPRS (MTMMC-G) Reference Manual

Connected Line Identification Presentation +COLP

Description:
This command controls the connected line identification presentation supplementary service - useful for
call forwarding of the connected line.
Values: <n> Parameter sets/shows the result code presentation status in the TA
<m> Parameter shows the subscriber COLP service status in the network
Syntax: Command syntax:
Response syntax:
Command
AT+COLP=1
Note: Activate COLP
AT+COLP?
Note: Ask for current
functionality
ATD146290928;
Note: Outgoing call
AT+COLP=0
Note: Deactivate COLP
Multi-Tech Systems, Inc. Wireless GSM/GPRS AT Commands (Document Number S000293I)
0
Disable
1
Enable
0
COLP not provisioned
1
COLP provisioned
2
Unknown (no network)
AT+COLP=<n>
+COLP: <n>,<m> (as response to AT+COLP?)
+COLP: <number>,<type> [ ,<subaddr>, <satype>, <alpha> ]
After ATD command, before OK or CONNECT <speed>
Chapter 10 – Supplementary Services Commands
Possible responses
OK
Note: Command valid
+COLP:1,1
OK
Note: COLP is enabled and provisioned
+COLP:"0146290928",129,,,"JOE"
or
+COLP:"0146290800",129,1,,,"8000204212FFFF" (UCS2 format)
OK
Note: Connected outgoing line number and name presentation
OK
Note: Command valid
84