Electrical Adjustments; Service Adjustment Menu Operation - Sanyo PLC-XF1000 Service Manual

Electrical Adjustments

Service Adjustment Menu Operation

to enter the service mode
To enter the "Service Mode", press and hold the MeNu and SeLect button for more than 3 seconds, or press and
hold the MeNu button on the remote control for more than 0 seconds. The service menu appears on the screen
as follows.
to adjust service data
Select the adjustment group no. by pressing the
select the adjustment item no. by pressing the pointer
button
W or X
. Refer to the "Service Adjustment Data Table" for further description of adjustment group no., item
no. and data value.
to exit the service mode
To exit the service mode, press the
Service Mode
Input Video
Group No. Data
0 0
Ver. R 1.00
Group No. Item No.
MeNu button
oN/StANd-BY button
32
Data value
(increase) or
U
or V button
, and change the data value by pressing the
.
-65-
SeLect button
(decrease), and