Sanyo PLC-XF1000 Service Manual page 34

Mechanical Disassembly
10 Lens shift ass'y removal
(Before disassembling, make sure the lens should be adjusted to the center position.)
1 Remove 4 screws-A(T4x14) and 4 screws-B(M4x1) and remove the lens shift ass'y
upward off.
B
B
10-1 Lens shift ass'y disassembly
1 Remove the motors.
 Remove the lens position detection switches.
3 Remove the Lens Base Net board.
Lens Shift Motor (U/D)
Lens Base Net Board
A
A
A
A
B
B
Cord
Lens shift ass'y
Lens Shift Motor (L/R)
Sensor Switch X
-34-
Sensor Switch Y