Table of Contents
Advertisement
Note:
• The "*" mark indicates that the position
number has been preset.
• The character "H" refers to the home position.
• The second line from the bottom shows
the preset ID corresponding to the
selected number. Preset Position can be
displayed in the right of "ID".
PRESET NO.
POSITION SET
PRESET ID
ALC/MANUAL
AF MODE
DWELL TIME
SCENE FILE
RET TOP DEL
A Position Setting
1. Move the cursor to "POSITION SET
the preset setting menu and press the
[SET] button.
The POSITION setting menu appears.
(1) Move the cursor to "→ PUSH SET" for
"ZOOM/FOCUS" and press the [SET]
button.
**POSITION
ZOOM/FOCUS
RET TOP
(2) Select a zoom position and a focus
position, and then press the [SET]
button. The positions are set and the
screen returns to the position setting
menu.
Note:
• If you move the cursor to the position
number and press the [LEFT] or [RIGHT]
button, the position number can be
selected. The selected preset position
number can also be set after pressing the
[SET] button.
30
1
ON
ALC
NORMAL
10S
OFF
1 **
PUSH SET
ZOOM
FOCUS
B Preset Identification Setting
1. Move the cursor to "PRESET ID" on the preset
setting menu and select "ON" or "OFF".
ON: Preset ID appears on the monitor screen.
OFF: Preset ID does not appear.
Default setting: ON
2. Press the [SET] button to display the
PRESET ID menu.
To Enter a New Preset ID
For registration, refer to the items of
CAMERA ID on page 21.
To Copy a Preset ID from Another Position
Move the cursor to "COPY" and press
the [SET] button. The preset ID in
the preceding positionis immediately
shown. Each consecutive pressing
of the [SET] button displays the ID
preceding the one currently displayed.
" on
To Edit a Preset ID
Move the "↑" to the characters to be
changed by pressing the [LEFT]
and [RIGHT] buttons, and enter new
characters follow the steps in "To edit
the CAMERA ID" (refer to page 21).
To Delete a Preset ID
Please refer to "To erase all characters
in the editing area" in page 22.
To Enter the Next ID without
Returning to the Preset Setting Menu
(1) In the preset ID setting menu, move
the cursor to the top line and select
a desired position number and
press the [SET] button.
(2) Enter, copy, change or delete the ID
as described above.
C Light Control Setting
Select "ALC" or "MANUAL".
Default setting: ALC
PRESET NO.
1*
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
SPACE
COPY POSI RET RESET
Advertisement
Table of Contents
