Table of Contents
Advertisement
Setup menu
Performing each setting item in the setup menu should be completed in advance to use this unit.
Perform the settings for each item in accordance with the conditions of the camera shooting area.
List of setup menu
Setup item
CAMERA
CAMERA ID
ALC/MANUAL
SHUTTER
AGC
SENS UP
WHITE BAL
VMD
DNR
BW MODE
PRIVACY ZONE Hides undesired portions in the camera shooting area.
AF MODE
ZOOM LIMIT
STABILIZER
UPSIDE-DOWN
PRESET POSITION
PRESET
MAP
HOME POSITION To set a position number for the home position.
SELF RETURN
AUTO MODE
IMAGE HOLD
ZOOM INVERSE The TELE/WIDE operation from the [UP] and [DOWN] buttons is reversed
FOCUS INVERSE The FAR/NEAR operation from the [LEFT] and [RIGHT] buttons is reversed
SPECIAL
CHROMA GAIN Adjusts the chroma level.
AP GAIN
PEDESTAL
DISPLAY
PIX OFF
REFRESH
CAMERA RESET Restores the settings in the setup menu to the default settings.
SER.NO.
COMMUNICATION
SCENE SELECT
LANGUAGE
PASSWORD LOCK
18
Description
Performs the camera operation settings.
This item specifies the camera title. The camera title that indicates the
camera location and other information about the camera is created with
alphanumeric characters and symbol, and displayed on the screen.
Performs settings Light control.
Specifies the electronic shutter speed.
Specifies gain adjustment.
Specifies electronic sensitivity enhancement.
Specifies white balance adjustment.
Performs settings regarding VMD (Video Motion Detector).
Selects the level of the digital noise reduction function.
Performs each setting regarding the black-and-white mode such as
switching between color and black-and-white images.
Selects auto focus mode.
A limitation is provided to prohibit the ZOOM operation in the direction of
TELE, exceeding the preset value.
Decides whether or not to enable the image stabilizer.
The video image is reversed upside down during ON setting.
Selects the position number. The preset setting menu appears on the
monitor screen.
The PRESET POSITION (MAP) menu appears on the monitor screen.
Set up the time needed to return to the home position automatically.
Use the auto mode setting to specify the camera movement mode.
The camera picture remains as a still image on the monitor screen until
the camera reaches the preset position.
during ON setting.
during ON setting.
Performs the special settings.
Adjusts the aperture level.
Adjusts the pedestal (brightness) level.
Configure the display setting.
Corrects image defects such as flaws.
The refresh operation is started.
Displays the serial number of this unit.
Selects RS485 or COAX or COAX (RCV).
Configure the scene select setting.
Selects a language to be used in the setup menu.
Performs settings password lock.
Advertisement
Table of Contents
