Operating The Roof Air Conditioner; Basic Notes On Operation; Using The Remote Control - Dometic B1600PLUS Operating Manual

Operating the roof air conditioner

➤ If you changed the position of the Dip switches:
Acknowledge the new setting using the Reset button (fig. 4 10, page 4).
Setting the time
➤ Set the current time: see chapter "Setting the time" on page 47.
9 Operating the roof air conditioner
9.1

Basic notes on operation

The roof air conditioner has three operating modes:
Operating mode
Off
Stand-by
On
You can use the remote control to
 switch the roof air conditioner to and from stand-by mode.
 make the settings
 select additional functions
9.2

Using the remote control

There are two ways to control the roof air conditioner with the remote control:
 You can transmit the values directly to the roof air conditioner when you
set them
 You can first specify all values on the remote control and then transmit
them collectively to the roof air conditioner
Transmitting values directly when they are set
The remote control must be pointed at the IR receiver (fig. 2
the control panel during operation.
When a button is pressed, the value is transmitted directly to the roof air con-
ditioner. The roof air conditioner confirms the receipt of data with a high note.
42
Features
The roof air conditioner is switched off.
The remote control is inactive.
The roof air conditioning is ready for operation and can be
switched on with the remote control. The lights are available.
The roof air conditioner is conditioning the air in the interior.
B1600PLUS, B2200, B2600
4,
page 3) on
EN