Chapter 2 - Hardware Installation; We Supply; You Supply; Safety Warnings - Multitech MT5656ZDX User Manual

Chapter 2 - Hardware Installation

This chapter shows you step-by-step how to set up your Multi-Tech modem, test it, and make your first calls.

We Supply

•
An MT5656ZDX data/fax modem or a MT5656ZDX-V voice/data/fax modem
•
A DC power transformer
•
One RJ11 phone cable
•
A printed Quick Start Guide
•
A CD containing modem drivers, communications software (PhoneTools), this User Guide, AT Commands Reference
Guide which includes voice commands, a Fax 1 Commands Reference Guide, and Adobe Acrobat software
•
Four vinyl gripper feet for the bottom of the modem

You Supply

•
A computer with an available serial port. The processor speed should be at least 75 MHz in order to take full advantage
of the ZDX-V's telephony features.
•
A shielded RS232 serial cable with a male DB-25 connector on one end and a connector to match your computer's
serial port on the other end.
•
A nearby AC power outlet
•
A nearby phone jack
Optional: If you want speakerphone functions along with the ability to record sound or .WAV files through the sound card at
the same time, you will need:
• One stereo PC microphone
• One stereo male to male patch cord
• One sound card
• Speakers

Safety Warnings

• Use this product only with UL- and CUL-listed computers.
• Never install phone wiring during a lightning storm.
• Never install a phone jack in a wet location unless the jack is specifically designed for wet locations.
• Never touch uninsulated phone wires or terminals unless the phone line has been disconnected at the network
interface.
• Use caution when installing or modifying phone lines.
• Avoid using a phone (other than a cordless type) during an electrical storm; there is a risk of electrical shock from
lightning.
• Do not use a phone in the vicinity of a gas leak.
• To reduce the risk of fire, use only 26 AWG or larger telephone line cord.
Multi-Tech Systems Inc. MT5656ZDX Series User Guide
Chapter 2 - Hardware Installation
5