NOTICE:
Ensure that your computer is turned off and unplugged before you change the jumper settings. Otherwise, damage to your computer or
unpredictable results can occur.
To change a jumper setting, pull the plug off its pin(s) and carefully fit it down onto the pin(s) indicated.
Jumper
Setting
Description
PSWD
Password features are enabled
Password features are disabled
(default)
CLR_CMOS
Clears the CMOS settings
Normal CMOS function
(default)
jumpered
unjumpered
Power Button
NOTICE:
To turn off your computer, perform an orderly computer shutdown when possible.
You can use the ACPI feature to configure the function of the Microsoft Windows 2000 and Windows XP operating systems.
Power Button Functions for Windows 2000 and Windows XP with ACPI Enabled
Action
Results
Computer Turned
On
and ACPI Enabled
Press
Computer goes into
power
standby mode or
button
turns off (depending
on the operating
system setup)
Hold
Computer turns off
power
button
for 6
seconds*
NOTE:
Pressing or holding the power button to shut down
the computer may result in data loss. Use the power button
to shut down the computer only if the operating system is
not responding.
Power Button Functions for Windows 2000 and Windows XP with ACPI Disabled
Action
Results
Computer
Computer in
Turned On and
Suspend
ACPI Disabled
Mode
Press power
Computer turns
Computer
button
off immediately
turns off
immediately
Hold power
Computer turns
Computer
button for 6
off
turns off
seconds*
NOTE:
Pressing or holding the power button to shut down
Computer
Computer
in Standby
Turned Off
Mode
Computer
Boots and
turns on
computer
turns on
Computer
Boots and
turns off
computer
turns on
Computer
Turned Off
Boots and
computer
turns on
Boots and
computer
turns on