Dell Precision 350 User Manual page 74

1 drive
2 bracket rails (2)
3 screws (4)
4. Gently slide the drive into place until the tabs securely click into position.
5. If you are installing a drive that has its own controller card, install the controller card in a card slot.
See the documentation that accompanied the drive and controller card to verify that the configuration is correct for your computer. Change any settings
necessary for correct configuration.
6. Connect the power, audio, and CD/DVD drive cables to the drive.
1 power cable
2 audio cable
3 CD/DVD drive cable
7. If you are installing a new CD/DVD drive rather than replacing a drive,
8. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.
9. Close the computer cover.
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.
10. Connect your computer and devices to electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
11. Update your configuration information by setting the appropriate Drive option (0 or 1) under Drives: Secondary to
Secondary Drive n" in "System Setup
12. Verify that your computer works correctly by running the
Back to Contents Page
remove the front-panel
Options" for more information.
Dell Diagnostics.
inserts.
Auto. See "Primary Drive n and