Alarm Mode - GLOBAL ASSISTIVE DEVICES Vibra LITE 12 Instruction Manual

will stop and the settings that are shown on the screen will be held.
Finish programming by repeating steps 1 and 2 and rotating through
the other steps to complete as needed.
To Select the Time Zone to be Displayed in the Calendar Mode:
1) While in the calendar mode, hold down the "SET/RST" button
until "T-Zone" is displayed at the top of the screen. The number "1",
"2" or "3" at the bottom of the screen will be flashing.
2) Use the "ST/STP" button to select the time zone wanted
displayed.
3) Press the "SET/RST" button to lock in the selected time zone.
Quick Viewing of Additional Time Zones:
While in the calendar mode press the "ST/STP" button to rotate to
the two time zones not currently displayed. If no button is pushed for
approximately five seconds, the screen will automatically return to
the Time Zone that was set to remain displayed.

ALARM MODE:

 Program up to twelve daily alarms.