GLOBAL ASSISTIVE DEVICES Vibra LITE 12 Instruction Manual page 15

Quick Viewing of Current Option Mode Settings:
1) Press the "MODE" button until "OPTION" is displayed at the top
of the screen. After approximately two seconds "VIBRA" will be
displayed. If vibration is currently turned on, "ON" will be displayed
at the bottom of the screen. If turned off, "OFF" will be displayed.
2) Press the "ST/STP" button repeatedly to view other current
option mode settings. („SOUND", "HOURLY", "BUTTON")
EL LIGHT: (DISPLAY BACK LIGHT)
Press the "LIGHT" button to turn on the backlight. Light will stay on
for approximately 3 seconds and then turn off automatically if
another button is not pushed. Light will continue to stay on while
any other button is pushed within 3 seconds.
BATTERY:
Standard 3 volt lithium CR2032 is required. Battery must be
replaced by a qualified person to maintain water resistance. Battery
life will vary due to how often the vibration function and EL Light are
used.